HX PCBS 2.0 is designed to create cellular coverage on railways, highways and in low populated areas. The system provide efficient use of the capacity of the existing network. The complex supports LTE FDD, UMTS, GSM (GSM-R) , as well as able to be adopted to 5G networks in the future. It allows you to consistently move the sectors of the base station (BS) at distances up to 60 km, while simultaneously reducing
capital and operating costs for the creation and maintenance of cellular infrastructure.
Modules:
– The FSC unit is designed to convert several carrier frequencies of LTE, UMTS
or GSM (GSM-R) received from the base station (BS) into internal HX PCBS 2.0
system
– The FSR unit is designed to receive and convert carrier frequencies using a
radio line or fiber-optic channel into cellular signals,
– The relay channel module (RM) ensures the operation of the built-in radioline
– The service channel module (SM) provides additional sectors on the remote
site where the FSR unit is installed
The FSC unit is installed on the site with the base station. It receives carrier
frequencies (GSM-R, GSM, LTE, UMTS standards) from the BS, converts them
into a relay channel (radio line or fiber-optic channel) and transmits to a remote
distance. The FSR unit installed at a remote site receives carrier frequencies via
a radio line or fiber-optic channel and provides signal from several sectors,
similar to a base station (one carrier per sector). Also, the FSR unit amplifies and
transmits the received signals further along the chain to the next site with HX
PCBS 2.0 equipment installed. The Service channel module (SM) is designed to
create additional sectors on the site with the FSR block and to enable the system
to work in MIMO mode