RM 6 BLOCK B 3/F JOINT VENTURE FACTORY BUILDING 76 HUNG TO ROAD KWUN TONG KL

The professional radio repeater HXR-22/1

If you use a complex radio communication system that requires the installation of a whole group of repeater modules, then you do not have to program each one separately. The display can display not only the channel number, but also its name (8 characters), which is undoubtedly very convenient if you have a large number of channels. In some cases, the ability to set an access password to program and control the repeater may also be useful. Until the eight-digit code matches, none of the setting values can be changed or viewed. A number of characteristic differences between this repeater and devices for the same purpose include the ability to install two tone cards (one is already installed initially), which allows you to divide subscribers into 2 groups of independent users. Standard repeater functions such as Tx TIMEOUT Timer, BUSY LOCK OUT, CTCSS BUSY LOCK OUT, etc. are also installed. There is a system to protect the repeater from overheating. The cooling device is activated when heated above 65C, and when heated to 85C, the transmitter power is reduced by 50%.The RP80 has two types of noise reduction: manual and electronic, which works effectively in the vast majority of cases.The design of the device provides for mounting the repeater in a 19″ rack.

Category:

The newest repeater/full-duplex base station will be a good purchase for organizations and structures that need high-quality communications over fairly long distances. The main advantage of this model is, first of all, the presence of a keyboard on the front panel, which allows the user to independently program and control the device .Next to the keyboard there is a well-readable display with the ability to change brightness, displaying the status of the repeater, the values of the settings you have made and the entire extensive system of menu options that provide quick access to a variety of built-in functions of the device .The HXR-22/1
delivers an output power of up to 50 Watts in the frequency range 140-174 MHz and up to 40 Watts in the frequency range 400-470 MHz. Please note that there is an automatic power control device specially designed for this repeater. It provides the highest power stability during long periods of time in gear. The repeater contains 100 memory channels, in each of which, in addition to frequencies, CTCSS tones can also be recorded, separately for reception and transmission, and a number of necessary service function settings. All memory is non-volatile and remains indefinitely after the power is turned off. The contents of channels can be copied from one device to another using a special connecting cable, i.e.

 

Basic

Number of channels 100
Frequency range 136-150 (F1)
146-162 (F3)
160-174 (F5)
340-365 (F8) RX
Type Synthesizer
Type of radiation 16KF3
Supply voltage 13.2 В
TX TX: 12 А
RX: 1 А
Standby: 0.3 А
Frequency grid step 25kHz, 12.5kHz
Frequency stability 0.00%
Temperature range -30°C – +60°C
Dimensions 142x482x400 mm
Weight 8 kg

RECEIVER

Sensitivity 0.25 µV (12dB Sinad)
W/R sensitivity 0.15 µV
Exit audio power 4 W

TRANSMITTER

Power 50 W
Harmonic distortion 5% (at 1 kHz)
Noise level 38dB